show typical seal

ST Range

A pneumatic combination push type tool, suitable for use with Dynaflex® *regular duty and Megadyn® **high tensile steel strapping. Suitable for flat and round pack applications. Requires overlap seals.

Strap

Strap

Strap

Thickness*

Thickness**

Strap

Tool

Partcode

Width (mm)

(mm)

(mm)

Tension (N)

Weight (kg)

HTST10
HTST13
HTST16
HTST19

9.5
12.7
16.0
19.0

0.40 - 0.80
0.40 - 0.80
0.40 - 0.80
0.40 - 0.80

0.40 - 0.63
0.40 - 0.63
0.40 - 0.63
0.40 - 0.63

1500
3000
4500
4500

4.00
4.00
4.00
4.00

Air Pressure Required 5.5/6.5 bar
Air Consumption 12 ltr/sec

show typical seal

TS Range

A heavy duty pneumatic combination tool, for use with both Dynaflex® *regular duty and Megadyn® **high tensile steel strapping. Suitable for flat and round pack applications. Requires overlap seals. The tool is quite heavy at 10.5kg and a suspension unit is therefore recommended.

Strap

Strap

Strap

Thickness*

Thickness**

Strap

Tool

Partcode

Width (mm)

(mm)

(mm)

Tension (N)

Weight (kg)

HTSTS19
HTSTS25
HTST32

19.0
25.0
32.0

0.60 - 1.00
0.60 - 1.00
0.60 - 1.00

0.63 - 0.80
0.63 - 0.80
0.63 - 0.80

9000
9000
9000

10.50
10.50
10.50

Air Pressure Required 5.0/6.5 bar
Air Consumption 12 ltr/sec

INCA Range

A pneumatic sealless combination tool, for use with Dynaflex® *regular duty and Megadyn® **high tensile steel strapping on flat loads and packages. The tool is quite heavy at 7.0kg and a suspension unit is therefore recommended.

Strap

Strap

Strap

Thickness*

Thickness**

Strap

Tool

Partcode

Width (mm)

(mm)

(mm)

Tension (N)

Weight (kg)

STINCA13
STINCA16
STINCA19

12.7
16.0
19.0

0.40 - 0.63
0.40 - 0.63
0.40 - 0.63

0.40 - 0.63
0.40 - 0.63
0.40 - 0.63

2000
3500
5500

6.50
7.00
7.00

Air Pressure Required 5.5/6.5 bar
Air Consumption 12 ltr/sec

E-mail this page

Print this page

Home   Contact   Site Map  Terms & Conditions

Terms of Use    Privacy Policy

© 2011 M. J. Maillis (UK) Limited. All Rights Reserved.